ESS® STRIKER TURBOFAN™ ANTI-FOG GOGGLE SYSTEM

  Features: • Two-speed push button switch technology fan can be set for maximum exhaust or silent operation. • PowerPod™ battery pack is positioned at the back of the headstrap for snag-free operation. • Runs up to 50 hours on continuous low speed with one AA battery. • Auto shut off. • Compatible with all standard helmets • Low profile allows an extra-wide field of view • Soft conforming face pad is comfortable enough for extended wear. • 40mm durable elasic strap with rear bucke for quick release • Lenses: 2.4mm high-impact polycarbonate, distortion-free, optically-correct • 100% UVA/UVB protection • ClearZone™ Anti-fog / Anti-scratch coating. • Exceeds Impact resistant to ANSI Z-87.1-2003+ and .22 cal ballistic impact test MIL-V-432511C. • Recommended for use over Prescription eyeglasses. • Rx Adaptable with Striker Rx Insert • Water-resistant. • Black frame •Made in USA. Includes: • Clear and Smoke Gray Lenses • Anti-reflective SpeedSleeve™ • Protective Storage Pouch. • ESS Model: ESS01BK-CAM.   Special Notes:   Fan goggles are dramatically better that traditional goggles at fog resistance, but in the most extreme fog-prone environments, it is important to use the fan preventatively. Users should activate the fan on slow speed before they begin to saturate the moisture content inside the goggles. The anti-fog lens coating is hydrophilic: it absorbs moisture to help prevent fogging, but once it has absorbed its fill of moisture, it can take time to dry the coating out (even with the fan on) without removing the goggles and letting the lens dry out. So the natural tendency for users to turn the fan on only after the goggle begins to fog is not optimal. If the fan is run on low speed well before the lens would fog, it will keep the coating from having to soak up the moisture by evacuating it. By ke